Tired of having scratches or knicks in your baseboards, and furniture from bumping into them with your vacuum cleaner?
Protect your investment with the new Bumpster vacuum bumper and duster.
The Bumpster is easily installed on any type of vacuum cleaner, and is machine washable and dryable.
When installed, The Bumpster should be approximately 1/2 inch from the floor. That height keeps the Bumpster from interfering with your vacuum operation. Prior to installing The Bumpster, wipe the front and sides of the power head with the enclosed alcohol wipe to ensure good contact. Wait a moment to allow the vacuum to dry. Take the long adhesive strip and center and fasten it across the front of your vacuum. Put The Bumpster in place. Sight where The Bumpster will make contact with the sides of your vacuum to determine where the side adhesive strips should be placed. Secure the side adhesive strips press firmly on the strips before attaching The Bumpster on the sides of your vacuum.
Here's what you will need to install the Bumpster on your vacuum cleaner; - The Bumpster
- 3 Adhesive Strips (included)
- Alcohol Wipe (included)
- Your Vacuum (sold separately)
Frequently Asked Questions about the Bumpster:
Question: Is the Bumpster washable?
Answer: Yes, The Bumpster is machine washable and dryable.
Question: Is The Bumpster difficult to install?
Answer: The Bumpster is actually easy to install. Just use the included adhesive strips to connect The Bumpster to the front of your vacuum. There are instructions with every package and also an installation page on this web site.
Question: What happens when The Bumpster gets too dirty?
Answer: The Bumpster is made of a durable Sherpa fabric and is designed to withstand numerous washings. If The Bumpster gets dirty – throw it in the washer again.