"HOOVER" VACUUM BELT2 Belts Per Blister Package. Eureka Vacuum Cleaner Replacement Belt. For Eureka & GE Upright Cleaners, Part #3852-7003. For optimum performance, change your belt at least once each year. DirectionsTo replace agitator belt:Remove cord from electrical outlet. Turn cleaner over. Remove bottom plate by turning two cam locks on each side. Release worn belt from the motor shaft pulley. Lift out the brush roll by grasping the center near the brush roll pulley, then lift upward and slightly forward. Place new belt around brush roll. To replace brush roll, insert the brush roll into the base so the long sides are nearly vertical and parallel with slots in the base. Push down firmly until the brush roll is seated. Hook belt around motor pulley shaft making sure the lower side of the belt is in belt guide. Replace bottom plate by placing slots of plate over tabs of cleaner base. Place bottom plate flat on cleaner base. Turn cam locks to secure bottom plate.
Rating: (0 Review)