Availability: In stock
The Centec Quiet Drive CT18DXQS features a 14 inch cleaning path can cover a large area, cutting down the time it takes to vacuum. The Quiet Drive Poly-V belt eliminates the vibration associated with gear belt systems, thus reducing the amount of noise when the power head is running. There is a built in Dirt Sensor that will turn green when the area your vacuuming is clean.
The Centec CT18DXQS is a direct replacement for the Nutone CT650. These two power heads are completely identical to each other. This power head also fits some Panasonic and Sears Kenmore canister vacuums.
The 4 position height adjustment can adjust to a wide variety of surfaces with just a tap of your foot. The wedge shape and large rear wheels help negotiate around and under things that you could not vacuum with other canisters. There is a built in overload devise that will help protect the motor from jams. You also get an easy release foot peddle on the neck of the power head to remove the wand above the floor use.
There is a full width headlight to see in dark areas and a non marring wrap around bumper for protection.
Note: If you are replacing an existing powerhead and have a Nutone CH310 hose, your new powerhead cord will be too short because of the length of the handle. In these situations, you may need to purchase the Nutone PT40 032B000 adaptor cord to make it fit. If you're replacing a CT650, you may use your existing lower wand, with the longer cord.
- Quick Release Wand Foot Lever
- Non Marking Wrap Around Bumper
- Dirt Sensor
- Reset Button
- 4 Position Height Adjustment Foot Lever and View Screen
- Large Rear Wheels