Item Code: Centecct20dxqspwrnozzle-OD
Availability: In stock
CenTec Electric Powerhead
The Centec CT20DXQS power nozzle features a 14 inch wide cleaning path to cut down the amount of time you spend cleaning. There are two active brush edge cleaners one on either side of the power head brush roller. You can guide either side of the brush along baseboards or next to furniture to help remove dirt trapped at carpet edges. There is also a built in dirt sensor that will turn green when the area you are cleaning is clean.
The built in overload protector protects the motor from brush jamming and belt breakage. If the agitator stops, the over load protector shuts off the motor to protect it. The QuietDrive Poly-V belt is always in contact to eliminate the intermittent chatter vibration of geared belt units, thus giving you quiet operation with increased gripping power.
Al This power head also fits some Panasonic and Sears Kenmore canister vacuums.
Note: If you are replacing an existing power head and have a NutoneCH310 hose your new powerhead cord will be too short because of the length of the handle. In these situations, you may need to purchase an adaptor cord if your current power head has a hard-wired power cord. If you're replacing aCT600, you may use your existing lower wand, with the longer cord.
Replacement Belt - Poly V Belt: EB2910
Benefits and Features:
- Quick Release Wand Foot Lever
- Non Marking Wrap Around Bumper
- Overload protector with Reset Button
- 4 Position Height Adjustment Foot Lever and View Screen
- Large Rear Wheels
- Sturdy, Wooden Roller Brush
- Dirt Sensor