Floor Polisher Parts

    If you have wooden floors then it is mandatory that you invest in a good floor polisher. Though the wooden floors give the rooms a warm and golden tone, taking care of them can be tricky if you’re not very careful. Wooden floors can be easily scratched, excess moisture and chemicals can damage the wood. Here we look at how to use a floor polisher on a wooden floor.

    How to use Floor Polisher on Wooden Floors

    •Clean the floor with a soft brushed broom or a vacuum cleaner before using the floor polisher.

    •Ensure that the pad of the floor polisher is clean and sparkling. Buff the floor with the pad from one corner to another until the entire room is covered.

    •You can either use a floor wax or make a all natural floor polish at home. In a double boiler heat 2 cups of mineral oil and 1 tbsp beeswax. Once they are melted drizzle the mixture evenly over the floor.

    •Slide a new pad into the floor polisher. Slowly move the floor polisher from the back of the room to the front in gentle motions. The slow and gentle motion of the floor polisher over the polish will bring a glow and sparkle to the floor.

    If you are planning to invest in a good floor polisher look no further than GoVacuum.com. Here we deal with only the top most brands such as Bissell, Bosch, Carpet, Dyson and so on. The floor polisher replacements such as pads, shower feed brush, roller brush are available with us. GoVacuum.com is a one stop for all your cleaning solutions.

     
    69 Items
    1. Filter QueenVacuum Cleaner 14 Inch Floor Brush FQ-5500

      Filter QueenVacuum Cleaner 14 Inch Floor Brush FQ-5500

      $94.40
      Works with: Filter Queen 31X, Filter Queen D31X, Filter Queen D33, Filter Queen RN92, Filter Queen PNG92, Filter Queen AN95-X, Filter Queen 99, Filter Queen 99A, Filter Queen Triple Crown, Filter Queen Majestic, Filter Queen AN95, Filter Queen FQ-5500 Learn More
    2. Kirby 2HD and Legend Dust Brush

      Kirby 2HD and Legend Dust Brush

      $14.95
      Genuine Kirby Dust Brush Fits 2HD and Legend I, Black with natural bristles. Learn More
    3. Genuine Kirby Brush Roll (Beater Bar).

      Genuine Kirby Brush Roll (Beater Bar).

      $22.95
      Fits Kirby Classic 1CR, Omega 1CB, Classic III, 2CB and 3CB models. (made of solid wood). Learn More
    4. Generic Kirby Brush Roll (Beater Bar) - 14" wide.

      Generic Kirby Brush Roll (Beater Bar) - 14" wide.

      $18.95
      Fits Heritage 2HD and Legend - Brush Roll with Magnet, picks up paper clips, staples, etc. Learn More
    5. Genuine Kirby Duster Brush.

      Genuine Kirby Duster Brush.

      $16.95
      The Kirby brand is synonymous with quality and they maintain the same quality with their replacement parts as well. One of the easiest ways to ensure that your vacuum cleaner is working in top condition is to replace worn out parts on time. Taking good care of your vacuum and buying necessary accessories such as this duster brush from Kirby can help to extend its efficacy and life. Since imitation parts might result in decreased efficiency, it is recommened that you stay away from Kirby parts imitators and buy genuine replacement parts such as this Kirby duster brush. Use it in your regular cleaning schedule and reduce the number of allergens in your home. Are you looking for Kirby vacuum filter bags, accessories and cleaning solutions? At GoVacuum, you can browse and find a variety of Kirby vacuum parts and accessories to suit your Kirby cleaning system. There’s no doubt that with proper care and maintenance Kirby systems can last a lifetime. Keep your vacuum performing longer, your home cleaner and you breathing better by buying genuine vacuum cleaner parts online at GoVacuum.com. Product Features: • One Genuine Kirby Duster Brush • Fits 1CB models Learn More
    6. Genuine Kirby Heritage I & II Brush Roll.

      Genuine Kirby Heritage I & II Brush Roll.

      $27.95
      Genuine Kirby brush roll fits Heritage I & Heritage II models . Learn More
    7. Genuine Kirby Magnetic Brush Roll.

      Genuine Kirby Magnetic Brush Roll.

      $26.95
      Genuine Kirby brush roll fits Heritage II and Legend vacuum cleaners - Brush Roll with Magnet, picks up paper clips, staples, etc. Learn More
    8. Kirby BrushRoll - 12" Wide.

      Kirby BrushRoll - 12" Wide.

      $18.95
      Generic brush roll 505 thru 562 and D80 models, 12" long 2 rows of brushes. Learn More
    9. Kirby 1HD Dust Brush. Kirby Part # 218481

      Kirby 1HD Dust Brush. Kirby Part # 218481

      $14.95
      Genuine Kirby Dust Brush Fits 1HD and Legend I, Gray with natural bristles.Kirby Part # 218481 Learn More
    10. Kirby 1HD Utility Brush - Gray. Kirby Part # 217981

      Kirby 1HD Utility Brush - Gray. Kirby Part # 217981

      $16.95
      Genuine Kirby Utility Brush Fits 1HD and Legend I vacuum cleaners (Gray with natural bristles).Kirby Part # 217981 Learn More
    11. Kirby 2HD & Legend Utility Brush.

      Kirby 2HD & Legend Utility Brush.

      $16.95
      Genuine Kirby Utility Brush Fits 2HD and Legend I, Black with natural bristles. Learn More
    12. Kirby 2HD & Legend Utility Brush. Kirby Part # 217984

      Kirby 2HD & Legend Utility Brush. Kirby Part # 217984

      $16.95
      Genuine Kirby Utility Brush Fits 2HD and Legend I, Black with natural bristles.Kirby Part # 217984 Learn More
    13. KIrby 2HD and Legend Dust Brush. Kirby Part # 218484

      KIrby 2HD and Legend Dust Brush. Kirby Part # 218484

      $14.95
      Genuine Kirby Dust Brush Fits 2HD and Legend I, Black with natural bristles.Kirby Part # 218484 Learn More
    14. Kirby Brush Roll (Beater Bar). Kirby Part # 152575

      Kirby Brush Roll (Beater Bar). Kirby Part # 152575

      $22.95
      Fits Kirby Classic 1CR, Omega 1CB, Classic III, 2CB and 3CB models. (made of solid wood).Kirby Part # 152575 Learn More
    15. Kirby G4 Vacuum Cleaner Dust Brush. Kirby Part # 218493S

      Kirby G4 Vacuum Cleaner Dust Brush. Kirby Part # 218493S

      $14.95
      Genuine Kirby Dust Brush Fits G4 models, natural bristles.Kirby Part # 218493S Learn More
    16. Kirby G4 Wall and Ceiling Brush. Kirby Part # 210893S

      Kirby G4 Wall and Ceiling Brush. Kirby Part # 210893S

      $16.95
      Genuine Kirby Wall and Ceiling Brush Fits G4 models, natural bristles.Kirby Part # 210893S Learn More
    17. Kirby G5 & GSix Brush Roll. Kirby Part # 152599

      Kirby G5 & GSix Brush Roll. Kirby Part # 152599

      $33.95
      Genuine Brush Roll with Magnet, fits Generation 5 and Generation 6 models (one end of the brush roll is grey and reads large cap, other end is black & reads small cap).Kirby Part # 152599 Learn More
    18. Kirby G5 Vacuum Cleaner Dust Brush. Kirby Part # 218497S

      Kirby G5 Vacuum Cleaner Dust Brush. Kirby Part # 218497S

      $14.95
      Genuine Kirby Dust Brush Fits G5 models, natural bristles.Kirby Part # 218497S Learn More
    19. Kirby G5 Wall/Ceiling Brush. Kirby Part # 210897S

      Kirby G5 Wall/Ceiling Brush. Kirby Part # 210897S

      $16.95
      Genuine Kirby Wall and Ceiling Brush Fits G5 models, natural bristles.Kirby Part # 210897S Learn More
    20. Kirby Generation 3 and G4 Pet Brush Roll (Beater Bar). Kirby Part # 156193

      Kirby Generation 3 and G4 Pet Brush Roll (Beater Bar). Kirby Part # 156193

      $32.95

      Did you know that you can increase the performance of your vacuum cleaner and extend the life of your vacuum by replacing its brushroll? You can save yourself from expensive vacuum cleaner repair by replacing the brush roll in a timely manner. When it comes to your Kirby cleaning system, you can clean the brush roll occasionally by unlatching the brush plate and pull out the brush roll before cleaning it. However, if you notice extensive damage to you Kirby Generation 3 and G4 Brush Roll, you can buy this Kirby Part # 156293 to replace it.

      Are you looking for discount Kirby parts including brush rools, Kirby supplies, Kirby vacuum bags and belts? At GoVacuum, we sell Kirby replacement parts for all Kirby vacuum models, and we also stock all the Kirby attachments you will need. If you can't find what you are looking for, get in touch with our customer service team and we will ensure that you find it in no time. Don’t forget to read the GoVacuum blog for news on the latest Kirby vacuums and cleaning tips for your home or office.

      Product Features:

      • One Kirby Generation 3 and G4 Brush Roll (Beater Bar) • Kirby Part # 156293 Learn More

    21. Kirby Generation 3 and G4 Pet Brush. Kirby Part # 214193

      Kirby Generation 3 and G4 Pet Brush. Kirby Part # 214193

      $8.95
      Genuine Kirby Generation 3 and G4 Massage Cup used to vacuum hair off of cats and dogs.Kirby Part # 214193 Learn More
    22. Kirby Generation 3 Duster Brush Assembly. Kirby Part # 218489S

      Kirby Generation 3 Duster Brush Assembly. Kirby Part # 218489S

      $14.95
      Genuine Kirby Grey Dust Brush Fits Generation 3 models, natural bristles.Kirby Part # 218489S Learn More
    23. Kirby Generation 3 Wall/Ceiling Brush Assembly. Kirby Part # 210889S

      Kirby Generation 3 Wall/Ceiling Brush Assembly. Kirby Part # 210889S

      $16.95
      Genuine Kirby Wasll and Ceiling Brush Fits Generation 3, natural bristles.Kirby Part # 210889S Learn More
    24. Kirby Generation 5 & 6 Brush Roll. Kirby Part # 152599

      Kirby Generation 5 & 6 Brush Roll. Kirby Part # 152502

      $33.95
      Genuine Brush Roll with Magnet, fits Generation 5 and Generation 6 models (one end of the brush roll is grey and reads large cap, other end is black & reads small cap).Kirby Part # 152599 Learn More
    25. Kirby GSix Dust Brush - Black. Kirby Part # 218499S

      Kirby GSix Dust Brush - Black. Kirby Part # 218499S

      $11.95
      Genuine Kirby Gsix Vacuum Cleaner Black Dust Brush.Kirby Part # 218499S Learn More
    26. Kirby GSix Wall / Ceiling Brush. Kirby Part # 210899S

      Kirby GSix Wall / Ceiling Brush. Kirby Part # 210899S

      $15.95
      Genuine Kirby Gsix Vacuum Cleaner Wall / Ceiling Brush.Kirby Part # 210899S Learn More
    27. Kirby Motor Carbon Brush w/Brush Holder. Kirby Part # 107189A

      Kirby Motor Carbon Brush w/Brush Holder. Kirby Part # 107189A

      $9.95
      One Genuine Kirby motor carbon brush. Fits Generatin 3, G4, G5, Gsix, Ultimate G, G2000 and G7 models. Includes carbon brush holder. (The motor uses two carbon brushes.).Kirby Part # 107189A Learn More

    Results 1 - 27 of 69

    Page:
    1. 1
    2. 2
    3. 3