Roller Brushes

    The roller brush of your vacuum cleaner sweeps dirt and debris off your floors. The bristles of the brush can be worn down over the period of time. This will prevent the brush from collecting all the dust and grime from the carpets and bare floors. The roller brush can be replaced if they are damaged or the bristles are worn out.

    How to increase the life span of a roller brush

    •The longetivity of the vacuum brush depends on how well you take care of it. The vacuum must be dusted and cleaned once in a while.

    •Unfasten the faceplate over the brush bar and remove the plastic faceplate. Using a pair of scissors cut the threads and hair that are entangled around the brush bar.

    •Using a rag wipe the dust and debris from the brush bar.

    •Replace the faceplate and tighten the fasteners before using the vacuum.

    Roller brushes of all the leading brands are available at GoVacuum.com. This is a place which offers replacements and the equipments at a bargain price. We also offer a world class customer service. Visit our site for all your unique cleaning needs. You can also chat with our customer care personal to clarify any of your queries.

     
    10 Items
    1. Kenmore Canister Vacuum Roller Brush For A Serpentine Belt

      Kenmore Canister Vacuum Roller Brush For A Serpentine Belt

      $33.95
      This roller brush fits Sears Kenmore and Panasonic canister vacuum cleaners. The picture in the bottom right hand corner of the picture, you will see the type of belt that works with this roller brush, this type of belt is called a serpentine belt. The Learn More
    2. Oreck XL Upright Replacement Roller Brush (Beater Bar) 016-1152

      Oreck XL Upright Replacement Roller Brush (Beater Bar) 016-1152

      $20.95
      This is a high quality replacement roller brush made by Cleavland Wood Products, the leader and highest quality generic roller brush maker on the market. MADE IN THE USA. This roller brush is identical to the genuine Oreck roller brush. Learn More
    3. Roller Brush for Oreck XL Upright Vacuum Cleaners

      Roller Brush for Oreck XL Upright Vacuum Cleaners

      $23.88
      Replacement roller brush for 2000, 9000 and 3000 series XL Upright Vacuum Cleaners Learn More
    4. Sears Kenmore Canister Vacuum Roller Brush With Round End Caps

      Sears Kenmore Canister Vacuum Roller Brush With Round End Caps

      $31.89
      Fits Sears Kenmore and Panasonic canister vacuum cleaners. This roller brush is for slightly older models that have a round end cap with two little hooks, or ears on the outside of the end caps. The roller brush measures 14", and uses a geared belt, or Learn More
    5. Oreck  Vacuum XL After Market Roller Brush Assembly +

      Oreck Vacuum XL After Market Roller Brush Assembly +

      $27.73
      This Oreck XL After Market Roller Brush Assembly is a replacement wood (not plastic!) Oreck XL roller brush. It will most Oreck XL upright models, including Classic, 2000, 3000, 8000 and 9000 series . It does not fit the 4000 series or the XL21. Why spend $59.99 for a genuine roller, when you have an almost identical roller, for more than half the price. We guarantee 100% satisfaction on the size and fit of this replacement roller. Learn More
    6. For Kenmore 8192535 14" Roller Brush for Progressive, Intuition PowerMate Power Nozzles Grooved and Square End Caps.

      For Kenmore 8192535 14" Roller Brush for Progressive, Intuition PowerMate Power Nozzles Grooved and Square End Caps.

      $32.29
      For Kenmore Canister Power Mate Roller Brush Assembly Complete, Part 8192535. This roller brush is approximately 14 and quarter inch in length, and has octagon shaped end caps on the ends of each side. For Kenmore canister models using a serpentine belt, 5201 or 5218. Learn More
    7. Kenmore 742478 Power Mate Canister Vacuum Cleaner Replacement Roller Brush Assembly.

      Kenmore 742478 Power Mate Canister Vacuum Cleaner Replacement Roller Brush Assembly.

      $43.47
      14 inch Replacement Beater Bar Assembly for Kenmore Progressive, PowerMate, QuietDrive, and other canister models. This is a replacement roller brush, or beater bar for the Kenmore canister vacuum cleaners. This brush roll assembly includes both end caps, the belt pulley, as well as the brush core completely assembled. Measures approximately 14 inches long. The end caps on this brush roller are circular with two hooks on each side. This brush roller is designed to be used with the power mate power heads that are perfectly square shaped, and used a cogged, or geared belt (Sears Kenmore Part 742024, or substitute 5285). This brush roller fits Sears Kenmore part numbers 8192670, 742478, 8175102, and 742454. Learn More
    8. Sears Kenmore Progressive Canister Brushroll 8192535

      Sears Kenmore Progressive Canister Brushroll 8192535

      $19.82
      Sears Kenmore Progressive Canister Brushroll 8192535 Learn More
    9. Oreck XL Replacement Roller Brush Assembly

      Oreck XL Replacement Roller Brush Assembly

      $12.85
      Genuine Oreck XL upright Roller Brush Fits 100, 800, 900, 9000, 2000, 3000, and 4000 series Oreck Upright Vacuums. ***DOES NOT FIT ORECK XL21**** Learn More
    10. Kenmore Upright Brush Roll with half moon end caps 8192015

      Kenmore Upright Brush Roll with half moon end caps 8192015

      $31.80
      Kenmore Upright Brush Roll with half moon end caps 8192015 Learn More

    Results 1 - 10 of 10