Wands

    When you buy a vacuum cleaner you get wands that can be attached to the hose. These wands and the accessories attached to them enable you to poke into areas where the vacuum cannot go. There are times when the suction of the vacuum can cause the wand to become stuck on the hose. Here we look at the ways to remove a wand that is stuck on the vacuum cleaner hose.

    The wand is stuck on my vacuum cleaner- How to take it out.

    •Hold the end of the telescoping wand where it is attached to the hose. Press the release button with one hand.

    •Now twist the end of the wand clockwise and then counter-clockwise. All this time the release button should be depressed.

    •Pull the wand off the hose while twisting it. Release the button only when the wand is free of the hose.

    •Another way is to lubricate the wand. Hold the hose in such a way that the wand is facing down.

    •Spray a good burst of lubricating spray around the seam where the hose meets the wand.

    •Hold the hose in the same position for a couple of minutes before twisting the end of the wand clockwise with one hand while turning the end of the hose anti-clockwise with the other hand. Continue twisting until the wand comes free of the hose.

    Wands including telescopic wands are available in GoVacuum.com. This is one stop vacuum cleaner portal for all your cleaning solutions. Govacuum.com deals with both commercial and domestic vacuum cleaners and their accessories.

     
    95 Items
    1. Eureka, Part #14070-3, 19 Inch Extension Straight Wand.

      Eureka, Part #14070-3, 19 Inch Extension Straight Wand.

      $9.10
      For Eureka Canister Vacuums and standard 1.25 inch fittings, this is the Eureka 19 inch extension straight wand, part number 14070-3. Learn More
    2. Hoover Part Number 12640720 Extension Wand For Mach 5 & Mach 6

      Hoover Part Number 12640720 Extension Wand For Mach 5 & Mach 6

      $8.99
      This is the Extension Wands for the Hoover Mach 5 & Mach 6 Bagless upright models U5194-900, and U5198-900 uprights. Genuine Hoover attachment part number 12640720. Learn More
    3. Thermax Upper Wand Assembly PB309, Part# 28-307-015

      Thermax Upper Wand Assembly PB309, Part# 28-307-015

      $100.15
      For the Thermax cleaning machines, this is the Upper Wand Assembly PB309, Part# 28-307-015; also listed as Thermax part number 28307015. Learn More
    4. Bissell Vacuum Bagless Upright Curved Wand Assembly Part # 203-2303

      Bissell Vacuum Bagless Upright Curved Wand Assembly Part # 203-2303

      $6.00
      This is the curved wand assembly for the Bissell bagless upright series; Velocity Series, PowerTrak Cyclonic Series, Momentum Series & Pet Hair Eraser.It fits Bissell model numbers; 3910, 3920, 3950, 3990, 6390, 6393, 6750, 82G7, and more. Learn More
    5. Bissell Healthy Home Metel Telescoping Extension Wand Assembly 2031373

      Bissell Healthy Home Metel Telescoping Extension Wand Assembly 2031373

      $17.95
      This is a metal telescoping extension wand assembly for the Bissell Healthy Home & Heavy Duty bagless upright vacuum cleaners. Fits Bissell models; 5770, 5770-5, 5770-8, 5770-P, 5990, 6100, 6405, 50C9, and more. Genuine Bissell Part 203-1373 2031373. Learn More
    6. Bissell Healthy Home Telescoping Extension Wand Assembly Part 203-1364

      Bissell Healthy Home Telescoping Extension Wand Assembly Part 203-1364

      $15.95
      This is the extension telescoping wand assembly for the Bissell Healthy Home, and Heavy Duty upright models. Connects onto the end of the attachment hose for cleaning above the floor, or hard to reach areas. Fits Bissell Healthy Home, and Heavy Duty mo Learn More
    7. Bissell Lift Off Telescoping Wand Assembly, Part 203-6625, 2036625.

      Bissell Lift Off Telescoping Wand Assembly, Part 203-6625, 2036625.

      $14.95
      This is a telescoping wand assembly for the Bissell Lift-Off series bagless upright vacuum cleaners. Fits Bissell Lift Off models; 3554, 3750, 3760, 4220, 6595, 6801, 6850, 6860, 89Q9 and 18Z6. Genuine Bissell Part 203-6625, 2036625. Learn More
    8. Dirt Devil 1JC0245600 Extension Wand

      Dirt Devil 1JC0245600 Extension Wand

      $6.32
      Dirt Devil Extension Wand Part # 1JC0245600 Learn More
    9. Electrolux Guardian/Legacy Replacement Wand Grey

      Electrolux Guardian/Legacy Replacement Wand Grey

      $44.99
      Electrolux vacuum cleaner blue wand fits models 6500, 7000, Lux9000, Central Vacs, Guardian, Epic 8000 and Renaissance. Learn More
    10. Eureka Crevice Wand Part #  77506-355N

      Eureka Crevice Wand Part # 77506-355N

      $7.10
      For Eureka and Sanitaire Upright Vacuums, this is the Eureka Crevice Wand Part # 77506-355N. Replaces part numbers: 71956A-119N and 71956A-355N. Learn More
    11. Eureka Outer Extension Wand Part # 71973-119N

      Eureka Outer Extension Wand Part # 71973-119N

      $7.10
      Single outer extension wand for an extended reach. Also part of the nested wand set, 71492A. Learn More
    12. Extension Wand 2.5" Dia..  Eureka Part #27576-1

      Extension Wand 2.5" Dia.. Eureka Part #27576-1

      $8.99
      Extension Wand 2.5" Dia.Extend your reach an additional 18 inches. Learn More
    13. Genuine Kirby Curved Wand.

      Genuine Kirby Curved Wand.

      $18.95
      There’s no doubt that cleaning takes on a whole new meaning with Kirby cleaning systems. The industry leader outlasts competition year after year by designing vacuum cleaning systems that deep clean, protect and maintain your home. Here is a genuine Kirby Curved Wand that fits 1CB models. This genuine Kirby part can replace the one on your existing system, if it has worn out due to extensive use. Are you looking for Kirby vacuum accessories, replacement bags and parts such as curved wands? You will need to replace these essential parts before they wear out or damage your Kirby cleaning system. With proper care and maintenance, you can keep your Kirby system running like new. At GoVacuum, we are determined to keep your Kirby system up and running. That’s why we stock the widest range of Kirby replacement parts and accessories you need for your Kirby home care system. You can browse the parts available on the website, determine if it suits your cleaning system and buy them conveniently online. We offer free shipping and also have an updated blog which provides you all the necessary information on genuine Kirby Supplies and more. Product Features: • One Genuine Kirby Curved Wand • Fits 1CB models Learn More
    14. Hoover Part Number 38634078 Extension Wand Foldaway Replacement 16"

      Hoover Part Number 38634078 Extension Wand Foldaway Replacement 16"

      $12.99
      This is the extension wand that works with all Hoover upright Models that use a friction fit to secure the attachment. It is NOT the type that uses a plastic knob on the end to secure the hose/wand. Genuine Hoover Part Learn More
    15. Kenmore AC99PDGBZV06 Telescopic Wand

      Kenmore AC99PDGBZV06 Telescopic Wand

      $68.12
      Kenmore Telescopic Expandable Wand Part # AC99PDGBZV06 Learn More
    16. Kenmore  69825 20" Progressive Wand Set

      Kenmore 69825 20" Progressive Wand Set

      $42.00
      Kenmore Progressive Wand Set Part # 69825 Learn More
    17. Kenmore 69826 17" Progressive Wand Set

      Kenmore 69826 17" Progressive Wand Set

      $39.95
      Kenmore Progressive Wand Set Part # 69826 Learn More
    18. Kenmore 20 Inch Lower Wand

      Kenmore 20 Inch Lower Wand

      $26.50
      This is a 20 Inch Lower Wand, part# 4170-02-Lower, for Kenmore and Panasonic canister vacuum cleaners. Replaces Panasonic Part# AC99pakszv06. Learn More
    19. Kirby G4 Extension Wand. Kirby Part # 224093

      Kirby G4 Extension Wand. Kirby Part # 224093

      $19.95
      Genuine Kirby G4 extension wand.Kirby Part # 224093 Learn More
    20. Kirby G5 Extension Wand - Black Cherry. Kirby Part # 224097

      Kirby G5 Extension Wand - Black Cherry. Kirby Part # 224097

      $16.95
      Genuine Kirby Black Cherry Colored G5 Extension Wand .Kirby Part # 224097 Learn More
    21. Kirby Generation 3 Extension Wand. Kirby Part # 224089

      Kirby Generation 3 Extension Wand. Kirby Part # 224089

      $16.95
      Genuine Kirby Generation 3 Extension Wand.Kirby Part # 224089 Learn More
    22. Kirby GSix Extension Wand - Black. Kirby Part # 224099

      Kirby GSix Extension Wand - Black. Kirby Part # 224099

      $16.95
      Genuine Black Kirby Gsix Vacuum Cleaner Extension Wand.Kirby Part # 224099 Learn More
    23. Lux (Lower) Sheath Wand Part # 43649RL

      Lux (Lower) Sheath Wand Part # 43649RL

      $19.90
      Lux (Lower) Sheath Wand Part # 43649RL Learn More
    24. Rainbow Power Nozzle Curved Wand. For Rainbow D4, D4C SE Model

      Rainbow Power Nozzle Curved Wand. For Rainbow D4, D4C SE Model

      $24.95
      Genuine Rainbow vacuum cleaner curved wand. This is the curved tube that the hose fits onto. Fits the D3C power nozzle model R-1650C, D4C power nozzle model R-2800C and the D4C SE power nozzle model R-4375C. . Rainbow Part # R-1999. Please use due diligen Learn More
    25. Rainbow Power Nozzle Straight Wand. For D3 Model.

      Rainbow Power Nozzle Straight Wand. For D3 Model.

      $27.95
      Genuine Rexair/Rainbow straight wand. This is the straight tube that the curved tube fits into. Fits the D3C power nozzle model R-1650C, D4C power nozzle model R-2800C and the D4C SE power nozzle model R-4375C.. Rainbow Part # R-5066. Please use due dilig Learn More
    26. Rainbow Power Nozzle Straight Wand. For Rainbow D4, D4C

      Rainbow Power Nozzle Straight Wand. For Rainbow D4, D4C

      $27.95
      Genuine Rexair/Rainbow straight wand. This is the straight tube that the curved tube fits into. Fits the D3C power nozzle model R-1650C, D4C power nozzle Learn More
    27. Rainbow Vacuum Bottom Wand. For Rainbow D4, D4C and SE Model

      Rainbow Vacuum Bottom Wand. For Rainbow D4, D4C and SE Model

      $23.95
      Genuine Rainbow vacuum cleaner bottom wand. This is botttom tube or wand that inserts into the non-electric floor tool, Fits D3, D4, D4C and D4C SE models.. Rainbow Part # R-934. Please use due diligence in ordering the parts. It may take 7-10 days to shi Learn More

    Results 1 - 27 of 95

    Page:
    1. 1
    2. 2
    3. 3
    4. 4